Arctic P8 / P12 / P14 PST PWM Pressure Case Fan

SKU
Arctic P8 / P12 / P14 PST PWM Pressure Case Fan
In stock
As low as RM42.00
-
+

Highlights

  • OPTIMISED FOR STATIC PRESSURE
    During the development of the new P12 PWM, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P12 PWM is particularly suitable for use on heatsinks and radiators.
  • STRONG COOLING PERFORMANCE
    Numerous improvements, such as an updated engine technology and a newly developed fan design, have noticeably increased the performance of P-fans. In internal performance tests leveled to 28 dB (A), the new P-fans left many competitors behind. More information can be found in our.
  • MORE EFFICIENT TECHNOLOGY
    The motor is powered by a Neodym-Iron-Boron-Magnet ring of the newest generation, which allows the new P12 PWM to run much more efficiently than its predecessors. This saves energy and lowers the coil temperature without comprimising the performance.
  • MAXIMUM QUIETNESS, MINIMUM VIBRATION
    Even at low speeds the operating sound of the new ARCTIC motor is barely noticeable. Due to a sinus-magnetizing the new motor only creates about 5 % of the vibration from commutation of a regular DC-motor without filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor.
  • EXTENDED LIFE SPAN
    A 10 °C lower motor temperature roughly doubles the life span of a fan. The new ARCTIC motor has a four times longer service life through its low coil temperature. Consequently, we have extended the warranty to 10 years.
  • 200 TO 1800 RPM REGULATED VIA PWM
    Thanks to the 4-pin connector, the RPM can be regulated in a broad spectrum via PWM. In this way, noise is kept at a minimum while maximum cooling performance is guaranteed when needed.
  • HIGH QUALITY BEARING
    Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.

SPECIFICATION

8CM fan

Fan Speed 200 - 3000 rpm
Airflow 23.4 CFM/ 40.3 m³/h
Static Pressure 1 (mm/H2O)
Noise Level 0.3 Sone
Fan Frame Standard
Controll Typ PWM
Connector 4-Pin Connector
Fan Bearing Fluid Dynamic Bearing
Typical Voltage 12 V DC
Starting Voltage 0 V
Current 0.14 A
Cable Lenght 400 mm
Lenght 80 mm
Width 80 mm
Height 25 mm
Weight 81 g

 

12CM fan

Fan Speed 200 - 1800 rpm
Airflow 56.3 CFM/ 95.7 m³/h
Static Pressure 2,20 (mm/H2O)
Noise Level 0.3 Sone
Fan Frame Standard
Controll Typ PST or not PST
Connector 4-Pin Connector
Fan Bearing Fluid Dynamic Bearing
Typical Voltage 12 V DC
Starting Voltage 3.9 V
Current 0.08 A
Cable Lenght 400 mm
Lenght 120 mm
Width 120 mm
Height 25 mm
Weight 139 g

 

14CM fan

Fan Speed 200 - 1700 rpm
Airflow 72.8 CFM/ 123.76 m³/h
Static Pressure 2,40 (mm/H2O)
Noise Level 0.3 Sone
Fan Frame Standard
Controll Typ PWM
Connector 4-Pin Connector
Fan Bearing Fluid Dynamic Bearing
Typical Voltage 12 V DC
Starting Voltage 3.9 V
Current 0.12 A
Cable Lenght 400 mm
Lenght 140 mm
Width 140 mm
Height 27 mm
Weight 194 g

 

More Information
Brand ARCTIC
Type Fan/Led Hub
Fan Size 80mm, 120mm, 140mm
Led No